Do you know the cost saving plan for cooling the workshop?

1. Energy saving and environmental friendly air conditioning can be used for factory cooling. Energy saving and environmental friendly air conditioning is a factory cooling equipment that is very different from traditional air conditioning. It does not have a compressor or refrigerant, and relies on the physical principle of water evaporation and heat absorption to cool down. It can quickly reduce the temperature of the factory workshop by about 4-10 degrees. While cooling down, it can also take into account the functional effects of ventilation, ventilation, dust removal, odor removal, and increasing oxygen content. Its most important feature is that it is very energy-efficient and power-saving. A 200 square meter factory can cool down in one hour with only 1 kilowatt hour of electricity, which is more energy-efficient and energy-saving than using traditional air conditioning. It can be used in both semi open and open environments. For workshops with large area and few people, if the position is fixed, it can also be used for local post cooling. For workshops with dense personnel, an overall cooling solution can be designed. Nowadays, both large and small enterprises are using energy-saving and environmentally friendly air conditioning as a cooling device for factory buildings, including some factories that use air conditioning as a cooling device for their workshops.
2. Industrial large fans can be used for cooling in factories. Industrial large fans are commonly used for cooling in large space factories and warehouses. The diameter of industrial large fans is 7.2 meters, and a single machine can cover over 44 meters. For example, in a 100 square meter factory, only two industrial large fans need to be installed to cool and ventilate. One hour consumes 1.3 kilowatt hours of electricity. Industrial large fans, as fans, also have certain requirements for installation height, so they are only suitable for ventilation and cooling in some tall spaces, as well as in factories without heat sources or with low temperature and good ventilation. It is not suitable for enclosed, airtight and odorous workshops, so industrial fans still have great requirements for places. In the past, some e-commerce logistics warehouses used them as ventilation and cooling equipment for factories. But in fact, there is a very short problem with using industrial large fans in industrial factories, which is that the cooling effect is not very good. Because industrial large fans stir indoor air flow through the rotation of their blades, rapid rotation will form a natural wind of 1-3 degrees, and the body will feel a temperature difference of about 3-6 degrees lower. However, for many high-temperature and stuffy workshops, the cooling range is far from enough. Therefore, in response to the cooling of high-temperature and stuffy factory buildings, we have introduced a fan fan combination, which is an environmentally friendly air conditioning+industrial large fan solution to solve the problem. How to match in detail depends on the factory area and surrounding conditions.
3. Factory cooling can use evaporative cooling, which saves 60% of electricity compared to traditional air conditioners. Nowadays, many factory cooling equipment manufacturers are launching environmentally friendly, energy-saving, evaporative cooling, and energy-saving air conditioners. It is an evaporative industrial energy-saving air conditioner with water evaporation technology, and its cooling principle is the same as that of traditional air conditioners. It only miniaturizes the water tower of traditional water-cooled air conditioners and places them in our machines, replacing traditional air cooling systems, Improve the efficiency of the air conditioning compressor to achieve the goal of energy conservation and electricity conservation.