How to do environmental air conditioning maintenance
Time：
2020-05-13
A. Pre-season maintenance: Before starting the season of use, check whether there are any obstacles around the air-conditioning unit and the air inlet. B. Use and maintenance of environmentally friendly air conditioners: pay attention to the cleanliness of the chassis. Press the "Clean" button to clean every day to prevent bacteria and odors.
A. Pre-season maintenance: Before starting the season of use, check whether there are any obstacles around the air-conditioning unit and the air inlet.
B. Use and maintenance of environmentally friendly air conditioners: pay attention to the cleanliness of the chassis. Press the "Clean" button to clean every day to prevent bacteria and odors.
C. Periodic maintenance of environmental protection air-conditioning units: The environmental protection air-conditioning operates for 1 to 2 months, such as wet curtains, filter clogging or dirty chassis should be cleaned when it is built, so as not to cause machine failure.
D. End of season maintenance: (do not use for a long time, remember to drain the water and cut off the power supply!) To prevent freezing damage to the body and breeding of mosquitoes, when it is shut down for a long time, the tap water should be turned off, and then press the cleaning button to clear up And cut off the power.
E. The internal cleaning of the unit: If the unit is operated for a long time, in order to ensure the cooling effect, the inside of the unit must be cleaned once every 1 or 2 months;
First: remove the wet curtain (a total of four parts, in no particular order.)
1. Unscrew the three screws on the upper part of the wet curtain.
2. Hold the shutter on the upper part of the wet curtain, gently pull the wet curtain outward, and then lift it up slightly to remove the wet curtain.
Second: Remove the top cover and water pipe assembly.
1. Unscrew the screw on the top cover first, and then lift the top cover up to take it off.
2. Loosen the hose clamp on the water pipe and loosen the water pipe. Lift up the water pipe assembly and take it off.
Third: the cleaning of water pipes.
1. If the hole on the water distribution pipe is blocked, you can poke it with a wire.
2. Clean the stains on the water pipe with clean water.
Fourth: cleaning of chassis and accessories.
1. Cleaning the chassis: use soft cloth or brush to clean the chassis.
2. Cleaning the wind blade: wipe the wind blade with a soft cloth. Be careful not to let the dust on the fan blades fall into the air duct.
3. Water level sensor cleaning: A small damp cloth can be used to wash away the dirt on the water level.
4. Cleaning the pump: You can use a brush to clean the dirt on the pump and its filter.
5. Cleaning the laundry drain valve: pay attention to the dirt on the bottom of the drain valve.
Fifth: wet curtain cleaning.
1. Rinse the wet curtain with clean water from inside to outside (note: the water pressure should not be too high when cleaning, and it is strictly forbidden to use acidic or alkaline detergents to clean the wet curtain.
2. Filter: The filter can be taken out and cleaned once a week. (Only limited to models with filters).
Sixth: filter cleaning. The cleaning method is as follows:
1. Unscrew the back cover of the filter:
2. Remove the dirt on the filter element: replace the back cover.
Seventh: After cleaning, install the machine in the reverse order of the steps removed. (Warning: When cleaning the environmental protection air conditioning unit, it must be shut down and turned off. Otherwise, there will be danger of electric shock or other injuries to the human body.
Related News
No. 3 Workshop, North Park Middle Road, Shishan Science and Technology Industrial Park
©Guangdong Zuomuyang Air Conditioning Equipment Co., Ltd.