Home page

Horizontal concealed fan-coil unit

The air supply to the clean room is sufficient to dilute or eliminate the contamination generated in the room. The air supply of the clean room will not significantly increase the pollution in the room. Steel and wood lab bench, all-steel lab bench, all-steel fume hood, fume hood, one-stop service for laboratory design and decoration

Keywords：

Air Cabinet Manufacturer, Chiller Manufacturer, Custom Air Conditioner Manufacturer, Special Industrial Air Conditioner

Classification：

Product Inquiry：

Product description

Technical parameters of fan coil (row 3) :

30PA standard type:

1. Rated cooling capacity: inlet dry bulb temperature 27℃, wet bulb temperature 19.5℃; The inlet temperature was 7℃, and the outlet temperature was 12℃.

2. Rated heat production: the air inlet dry bulb temperature is 21℃, the hot water supply temperature is 60℃, which is measured under the same water flow condition as that during refrigeration.

3. The measurement of noise value of sound pressure level is marked as GB/T19232-2003 FAN-Coil Unit.

4, low static pressure 12PA, standard static pressure 30pa, high static pressure 50pa.

5. Specifications are subject to change due to product improvement without prior notice. Please refer to the nameplate of the unit.

Optional configuration

1. Auxiliary PTC electric heating:

Features: with automatic constant temperature, heater save cost, service life is long, its most prominent point is that safety performance is good, when the electricity heating reaches a certain temperature, the resistance increased dramatically, at this time the heating power will then fell sharply, almost stop heating, when after a period of time due to heat the temperature lower than the value, resistance fell sharply again, begin to continue to heat to keep warm.

2. All-copper motor adopts higher performance permanent magnet material, which has good starting and speed regulation performance and little influence from electromagnetic interference, thus reducing energy consumption and improving efficiency.

Brushless DC motor can be selected for high energy efficiency (over 80%); Low static pressure (running below 32dB), full string magnetization, low speed (full string drive).

3. according to customer requirements can design four control fan coil, hot and cold at will.

4. The combination of photocatalyst and ULTRAVIOLET lamp can be added as needed to remove bacteria and purify the environment.

5. The heat sink can be selected as hydrophilic foil, light foil or copper foil

6. No bellows will be brought back by default. Bellows can be brought back according to customers' requirements.

7. Fan-coil temperature controller, stainless steel soft connection, electric valve, gate valve, etc.

Committed to various fields of central air conditioning from the host to the end equipment, including: clean room air conditioning units, modular air conditioning units, water (air) cooling chillers, heat pump hot water units, fan coil units, refrigeration units, edible mushroom refrigeration units, special air conditioning design and manufacturing, and so on. The company is a modern and highly reputable technology enterprise that integrates research and development, design, production, sales, installation, and service.